MACHINES
SINGLE-ROTOR HAMMER BREAKER
Located in the raw material preparation section, this machine is used to crush material with a size of 15-20 cm into fine particles of 0-8 mm. It has a rotor equipped with movable hammers. Replaceable wear grids are installed under the machine to control the particle size of the output material. The inner body of the machine is lined with wear-resistant plates, which are designed to be easily and quickly replaced. The machine complies with international safety standards.
| TECHNICAL SPECIFICATIONS | |||||
|---|---|---|---|---|---|
| SPECIFICATIONS | UNIT | Ø 500x500 | Ø 700x700 | Ø 800x1000 | Ø 1100x1100 |
| Rotor Width | mm | 500 | 700 | 1000 | 1100 |
| Rotor Speed | rpm | 1000-1200 | 950-1100 | 690-720 | 650-700 |
| Motor Power | kW | 22 | 45 | 90 / 110 | 90 / 110 |
| Capacity | t/h | 8 - 15 | 10 - 20 | 20 - 50 | 30 - 70 |
SINGLE ROTOR HAMMER BREAKER ADJUSTMENT
| TECHNICAL DIMENSIONS (mm) | ||||||
|---|---|---|---|---|---|---|
| MODEL | A | B | C | D | E | F |
| TRK Ø 500x500 | 1700 | 630 | 935 | 960 | 930 | 1600 |
| TRK Ø 700x700 | 2200 | 815 | 1210 | 1160 | 1060 | 1830 |
| TRK Ø 800x1000 | 2500 | 1350 | 1515 | 1700 | 1510 | 2330 |
| TRK Ø 1100x1100 | 3170 | 1460 | 1815 | 2050 | 2190 | 3000 |
SINGLE-ROTOR HAMMER BREAKER
Located in the raw material preparation section, this machine is used to crush material with a size of 15-20 cm into fine particles of 0-8 mm. It has a rotor equipped with movable hammers. Replaceable wear grids are installed under the machine to control the particle size of the output material. The inner body of the machine is lined with wear-resistant plates, which are designed to be easily and quickly replaced. The machine complies with international safety standards.
| TECHNICAL SPECIFICATIONS | |||||
|---|---|---|---|---|---|
| SPECIFICATIONS | UNIT | Ø 500x500 | Ø 700x700 | Ø 800x1000 | Ø 1100x1100 |
| Rotor Width | mm | 500 | 700 | 1000 | 1100 |
| Rotor Speed | rpm | 1000-1200 | 950-1100 | 690-720 | 650-700 |
| Motor Power | kW | 22 | 45 | 90 / 110 | 90 / 110 |
| Capacity | t/h | 8 - 15 | 10 - 20 | 20 - 50 | 30 - 70 |
SINGLE ROTOR HAMMER BREAKER ADJUSTMENT
| TECHNICAL DIMENSIONS (mm) | ||||||
|---|---|---|---|---|---|---|
| MODEL | A | B | C | D | E | F |
| TRK Ø 500x500 | 1700 | 630 | 935 | 960 | 930 | 1600 |
| TRK Ø 700x700 | 2200 | 815 | 1210 | 1160 | 1060 | 1830 |
| TRK Ø 800x1000 | 2500 | 1350 | 1515 | 1700 | 1510 | 2330 |
| TRK Ø 1100x1100 | 3170 | 1460 | 1815 | 2050 | 2190 | 3000 |